This PhD dissertation analyzes the performance of second generation digital video broadcasting (DVB) systems in mobile terrestrial environments and proposes an iterative detection algorithm based on factor graphs (FG) to reduce the distortion caused by the time variation of the channel, providing error-free communication in very severe mobile conditions. The research work focuses on mobile scenarios where the intercarrier interference (ICI) is very high: high vehicular speeds when long orthogonal frequency-division multiplexing (OFDM) blocks are used. As a starting point, we provide the theoretical background on the main topics behind the transmission and reception of terrestrial digital television signals in mobile environments, long with a general overview of the main signal processing techniques included in last generation terrestrial DVB systems. The proposed FG-based detector design is then assessed over a simpli ed bit-interleaved coded modulation (BICM)-OFDM communication scheme for a ...

Throughout this work, channel estimation techniques have been analyzed and proposed for moderate and very high mobility DVB (digital video broadcasting) receivers, focusing on the DVB-T2 (Digital Video Broadcasting - Terrestrial 2) framework and the forthcoming DVB-NGH (Digital Video Broadcasting - Next Generation Handheld) standard. Mobility support is one of the key features of these DVB specifications, which try to deal with the challenge of enabling HDTV (high definition television) delivery at high vehicular speed. In high-mobility scenarios, the channel response varies within an OFDM (orthogonal frequency-division multiplexing) block and the subcarriers are no longer orthogonal, which leads to the so-called ICI (inter-carrier interference), making the system performance drop severely. Therefore, in order to successfully decode the transmitted data, ICI-aware detectors are necessary and accurate CSI (channel state information), including the ICI terms, is required at the receiver. With the ...

In the last decade, one of the most significant technological developments that led to the new broadband wireless generation is the communication via multiple-input multiple-output (MIMO) systems. MIMO technologies have been adopted by many wireless standards such as Long Term Evolution (LTE), Wordlwide interoperability for Microwave Access (WiMAX) and Wireless Local Area Network (WLAN). This is mainly due to their ability to increase the maximum transmission rates, together with the achieved reliability and coverage of current wireless communications, all without the need for additional bandwidth nor transmit power. Nevertheless, the advantages provided by MIMO systems come at the expense of a substantial increase in the cost to deploy multiple antennas and also in the receiver complexity, which has a major impact on the power consumption. Therefore, the design of low-complexity receivers is an important issue which is tackled throughout this ...

Multiple input multiple output (MIMO) techniques have been widely employed by dif- ferent wireless systems with many advantages. By using multiple antennas, the system is able to transmit multiple data streams simultaneously and within the same frequency band. The methods known as spatial multiplexing (SM) and spatial diversity (SD) im- proves the high spectral efficiency and link reliability of wireless communication systems without requiring additional transmitting power. By introducing channel coding in the transmission procedure, the information redundancy is introduced to further improve the reliability of SM links and the quality of service for the next generation communication systems. However, the throughput performance of these systems is limited by interference. A number of different interference suppression techniques have been reported in the literature. Theses techniques can be generally categorised into two aspects: the preprocessing techniques at the transmitter side and ...

Since several years, multi-antenna systems are foreseen as a potential solution for increasing the throughput of future wireless communication systems. The aim of this thesis is to study and to improve the transmitter and receiver's techniques of these MIMO (Multiple Input Multiple Output) systems in the context of a multi-carrier transmission. On the one hand, the OFDM (Orthogonal Frequency Division Multiplex) modulation, which transform a frequency selective channel into multiple non frequency selective channels, is particularly well adapted to the conception of MIMO receivers with low complexity. On the other hand, two techniques allowing to improve the exploitation of frequential and/or temporal diversities are associated with OFDM, namely linear precoding (LP-OFDM) and CDMA in a MC-CDMA (Multicarrier Code division Multiplex Access) scheme. We have associated LP-OFDM and MC-CDMA with two MIMO techniques which require no channel state information at the ...

Bit-rate and quality of service demands of new wireless communication standards are pushing signal theory and algorithm implementation to their limits. One of the main strategies which are being used to achieve the demanded rates is the multiple input-multiple output (MIMO) technique, which employs multiple antennas, both at transmission and reception. This PhD dissertation concentrates on the analysis of the effects of channel estimation, specially complex due to the number of parameters to estimate, on the performance of MIMO detectors, focusing on both practical and theoretical aspects. The practical analysis has been addressed by designing and developing a real-time wireless MIMO communication platform. A whole 2 X 2 system has been implemented which has allowed to evaluate the eects of a real hardware implementation on the performance of the MIMO receiver. A zero-forcing (ZF) detector and a sphere decoder (SD) ...

The demand for high-speed communications required by cutting-edge applications has put a strain on the already saturated wireless spectrum. The incorporation of antenna arrays at both ends of the communication link has provided improved spectral efficiency and link reliability to the inherently complex wireless environment, thus allowing for the thriving of high data-rate applications without the cost of extra bandwidth consumption. As a consequence to this, multiple-input multiple-output (MIMO) systems have become the key technology for wideband communication standards both in single-user and multi-user setups. The main difficulty in single-user MIMO systems stems from the signal detection stage at the receiver, whereas multi-user downlink systems struggle with the challenge of enabling non-cooperative signal acquisition at the user terminals. In this respect, precoding techniques perform a pre-equalization stage at the base station so that the signal at each receiver can be ...

When data is transmitted over the wireless communication channel, the transmit signal experiences distortion depending on the channel¢s fading characteristics. On the one hand, this calls for efficient processing at the receiver to mitigate the detrimental effects of the channel and maximize data throughput. On the other hand, the diversity inherently present in these channels can be leveraged with appropriate transmit processing in order to increase the reliability of the transmission link. Recently, in [1] it was shown that the channel characteristics can be exploited to maximize the total data throughput in the interference channel where multiple user pairs rely on the same resource to communicate among themselves. In this PhD dissertation, we first propose novel equalizer designs for frequency selective channels. We then present new results on the diversity gain of equalizers in fading channels when appropriate precoding is ...

The demand for mobile communication systems with high data rates has dramatically increased in recent years. New methods are necessary in order to satisfy this huge communications demand, exploiting the limited resources such as bandwidth and power as efficient as possible. MIMO systems with multiple an- tenna elements at both link ends are an efficient solution for future wireless communications systems as they provide high data rates by exploiting the spatial domain under the constraints of limited bandwidth and transmit power. Space-Time Block Coding (STBC) is a MIMO transmit strategy which exploits transmit diversity and high reliability. STBCs can be divided into two main classes, namely, Orthogonal Space-Time Block Codes (OSTBCs) and Non-Orthogonal Space-Time Block Codes (NOSTBCs). The Quasi-Orthogonal Space-Time Block Codes (QSTBCs) belong to class of NOSTBCs and have been an intensive area of research. The OSTBCs achieve full ...

The goal of this Ph.D. dissertation is to address a number of challenges encountered in the digital baseband design of modern and future wireless communication systems. The fast and continuous evolution of wireless communications has been driven by the ambitious goal of providing ubiquitous services that could guarantee high throughput, reliability of the communication link and satisfy the increasing demand for efficient re-utilization of the heavily populated wireless spectrum. To cope with these ever-growing performance requirements, researchers around the world have introduced sophisticated broadband physical (PHY)-layer communication schemes able to accommodate higher bandwidth, which indicatively include multiple antennas at the transmitter and receiver and are capable of delivering improved spectral efficiency by applying interference management policies. The merging of Multiple Input Multiple Output (MIMO) schemes with the Orthogonal Frequency Division Multiplexing (OFDM) offers a flexible signal processing substrate to implement ...

Multi-input multi-output (MIMO) wireless networks and distributed MIMO relaying wireless networks have attracted significant attention in current generation of wireless communication networks, and will play a key role in the next generation of wireless net- works. The improvement of network capacity, data rate and reliability can be achieved at the cost of increasing computational complexity of employing space-time coding (STC) and distributed STC (DSTC) in MIMO and distributed MIMO relaying networks, respectively. Efficient designs and algorithms to achieve high diversity and coding gains with low computational complexity in encoding and decoding of STC and DSTC schemes are essential. In this thesis, DSTC designs with high diversity and coding gains and efficient detection and code matrices optimization algorithms in cooperative MIMO networks are proposed. Firstly, adaptive power allocation (PA) algorithms with different criteria for a coop- erative MIMO network equipped with ...

Cooperative communications and multiple-input multiple-output (MIMO) communication systems are important topics in current research that will play key roles in the future of wireless networks and standards. These techniques can provide gains in data throughput, network capacity, coverage, outage, reduced error rates and power consumption, but can have an increased cost in computational complexity and present new problems in many areas. In this thesis, the various challenges in accurately detecting and estimating data signals and allocating resources in the cooperative systems are investigated. Firstly, we propose a cross-layer design strategy that consists of a cooperative maximum likelihood (ML) detector operating in conjunction with link selection for a cooperative MIMO network. The cooperative ML detector is derived, with considerations and approximations made for the knowledge of the system information that is available to the detector. Link selection in the cooperative network ...

In this thesis, we consider four different scenarios of interest in modern satellite communications. For each scenario, we will propose the use of advanced solutions aimed at increasing the spectral efficiency of the communication links. First, we will investigate the optimization of the current standard for digital video broadcasting. We will increase the symbol rate of the signal and determine the optimal signal bandwidth. We will apply the time packing technique and propose a specifically design constellation. We will then compare some receiver architectures with different performance and complexity. The second scenario still addresses broadcast transmissions, but in a network composed of two satellites. We will compare three alternative transceiver strategies, namely, signals completely overlapped in frequency, frequency division multiplexing, and the Alamouti space-time block code, and, for each technique, we will derive theoretical results on the achievable rates. We ...

This thesis investigates and analyses the performance of terrestrial free-space optical communication (FSO) system based on the phase shift keying pre-modulated subcarrier intensity modulation (SIM). The results are theoretically and experimentally compared with the classical On-Off keying (OOK) modulated FSO system in the presence of atmospheric turbulence. The performance analysis is based on the bit error rate (BER) and outage probability metrics. Optical signal traversing the atmospheric channel suffers attenuation due to scattering and absorption of the signal by aerosols, fog, atmospheric gases and precipitation. In the event of thick fog, the atmospheric attenuation coefficient exceeds 100 dB/km, this potentially limits the achievable FSO link length to less than 1 kilometre. But even in clear atmospheric conditions when signal absorption and scattering are less severe with a combined attenuation coefficient of less than 1 dB/km, the atmospheric turbulence significantly impairs ...

In 1948, the Shannon’s work titled ”A mathematical theory of communication” completely revolutionized the way to understand the problem of the reliable communications. He showed that any communications system is able to transmit with an arbitrarily low error probability as long as the transmission rate is kept below a certain limit. The separation between the source and channel coding was also shown as the optimal strategy to achieve the theoretical limits. Those ideas inspire the development of a whole digital communication theory focused on building more and more sophisticated coding schemes. It leads to most of communication systems were designed according to a digital approach and the separation principle from that moment, whereas other alternatives were set aside. However, in the last years, communication systems based on a jointly optimization of the source and channel encoder has aroused the interest ...