Nowadays, the design of embedded systems is confronted with the combination of complex signal processing algorithms on the one hand and a variety of computational intensive multimedia applications on the other hand, while time to product launch has been extremely reduced. Especially in the wireless domain those challenges are stacked with tough requirements on power consumption and chip size. Unfortunately, design productivity did not undergo a similar progression and therefore fails to cope with the heterogeneity of modern hardware architectures. Until now, electronic design automation do not provide for complete coverage of the design ow. In particular crucial design tasks as high level characterisation of algorithms, oating-point to xed-point conversion, automated hardware/software partitioning, and automated virtual prototyping are not suciently supported or completely absent. In recent years a consistent design framework named Open Tool Integration Environment (OTIE) has been established ...

The goal of this Ph.D. dissertation is to address a number of challenges encountered in the digital baseband design of modern and future wireless communication systems. The fast and continuous evolution of wireless communications has been driven by the ambitious goal of providing ubiquitous services that could guarantee high throughput, reliability of the communication link and satisfy the increasing demand for efficient re-utilization of the heavily populated wireless spectrum. To cope with these ever-growing performance requirements, researchers around the world have introduced sophisticated broadband physical (PHY)-layer communication schemes able to accommodate higher bandwidth, which indicatively include multiple antennas at the transmitter and receiver and are capable of delivering improved spectral efficiency by applying interference management policies. The merging of Multiple Input Multiple Output (MIMO) schemes with the Orthogonal Frequency Division Multiplexing (OFDM) offers a flexible signal processing substrate to implement ...

The evolution of electronic devices has made a tremendous progress within the last 50 years, thus today's world they can be found nearly everywhere, such as cell phones, camcorders, antiblock-brakes. The design of such complex system, that consists of hardware and software has to cope with several obstacles like for example high system complexity and increasing economical demands like shortened time-to-market. Those barriers get especially visible in the wireless domain. Here, design productivity lacks behind the possible computational complexity famously described with Moore's law. The importance to cope efficently with these problems of system designing has been highlighted by the International Technology Roadmap for Semiconductors. This thesis examines one of the design tasks namely design space exploration. Since the description of systems raises constantly its level of abstraction which causes a higher ability for exploring design variants the automatic derivation ...

In the current heterogeneous communication environments, the great variety of multimedia systems and applications combined with fast evolution of networking architectures and topologies, give rise to new research problems related to the various elements of the communication chain. This includes, the ever present problem in video communications, which results from the need for coping with transmission errors and losses. In this context, video streaming with path diversity appeared as a novel communication framework, involving different technological fields and posing several research challenges. The research work carried out in this thesis is a contribution to robust video coding and adaptation techniques in the field of Multiple Description Coding (MDC) for multipath video streaming. The thesis starts with a thorough study of MDC and its theoretical basis followed by a description of the most important practical implementation aspects currently available in literature. ...

In the world of Information and communications technology (ICT), strategies for innovation and development are increasingly focusing on applications that require spatial representation and real-time interaction with and within 3D-media environments. One of the major challenges that such applications have to address is user-centricity, reflecting e.g. on developing complexity-hiding services so that people can personalize their own delivery of services. In these terms, multimodal interfaces represent a key factor for enabling an inclusive use of new technologies by everyone. In order to achieve this, multimodal realistic models that describe our environment are needed, and in particular models that accurately describe the acoustics of the environment and communication through the auditory modality are required. Examples of currently active research directions and application areas include 3DTV and future internet, 3D visual-sound scene coding, transmission and reconstruction and teleconferencing systems, to name but ...

Over the last few decades, transistor miniaturization has enabled a tremendous increase in the processing capability of commercial electronic devices, which, combined with the reduction of production costs, has tremendously fostered the usage of the Information and Communications Technologies (ICTs) both in terms of number of users and required data rates. In turn, this has led to a tremendous increment in the energetic demand of the ICT sector, which is expected to further grow during the upcoming years, reaching unsustainable levels of greenhouse gas emissions as reported by the European Council. Additionally, the autonomy of battery operated devices is getting reduced year after year since battery technology has not evolved fast enough to cope with the increase of energy consumption associated to the growth of the node’s processing capability. Energy harvesting, which is known as the process of collecting energy ...

Wireless communications have gone through an exponential growth in the last several years and it is forecast that this growth will be sustained for the coming decades. This ever-increasing demand for radio resources is now facing one of its main limitations: inter-user interference, arising from the fact of multiple users accessing the propagation medium simultaneously which limits the total amount of data that can be reliably communicated through the wireless links. Traditionally, interference has been dealt with by allocating disjoint channel resources to distinct users. However, the advent of a novel interference coordination technique known as interference alignment (IA) brought to the forefront the promise of a much larger spectral efficiency. This dissertation revolves around the idea of linear interference alignment for a network consisting of several mutually interfering transmitter-receiver pairs, which is com-monly known as interference channel. In particular, ...

The widespread use of mobile internet and smart applications has led to an explosive growth in mobile data traffic. With the rise of smart homes, smart buildings, and smart cities, this demand is ever growing since future communication systems will require the integration of multiple networks serving diverse sectors, domains and applications, such as multimedia, virtual or augmented reality, machine-to-machine (M2M) communication / the Internet of things (IoT), automotive applications, and many more. Therefore, in the future, the communication systems will not only be required to provide Gbps wireless connectivity but also fulfill other requirements such as low latency and massive machine type connectivity while ensuring the quality of service. Without significant technological advances to increase the system capacity, the existing telecommunications infrastructure will be unable to support these multi-dimensional requirements. This poses an important demand for suitable waveforms with ...

he main objective of the Magnetospheric Multiscale (MMS) mission is to characterize fine-scale structures in the Earth’s magnetotail and magnetopause. These dynamic structures traverse the MMS spacecraft formation at high speed and generate magnetic field signatures that cross the sensitive frequency bands of both search-coil and fluxgate magnetometers. An improved understanding of these events is only possible by combining data from both instrument types for magnetospheric event analysis. This combination is done using a model-based sensor fusion approach that merges data from both instrument types to a virtual instrument with flat gain curve, linear phase and known timing properties as well as the highest sensitivity and lowest noise floor. The generation of the underlying instrument models requires precise knowledge of the instrument frequency responses and timing. This knowledge was obtained in a dedicated end-to-end measurement campaign using a purpose-built magnetic ...

The next generation of wireless communication networks will facilitate the connection of a large number of devices and a broad range of services. Serving such a large amount of user equipment (UEs) can be of very high cost if using active antenna solutions such as increasing the number of base stations (BSs), using massive multiple-input multiple-output (MIMO) antennas, and deploying relays between the BSs and the UEs. In this context, a passive antenna solution, such as reconfigurable intelligent surfaces (RISs), would be more beneficial and attractive. RIS has become an emerging technology with diverse applications in future wireless networks, owing to its ability to dynamically control and optimize the propagation environment. The rapid evolution driven by escalating performance demands of coverage in blocked line-of-sight (LOS) scenarios has prompted the exploration of RIS. Motivated by the potential benefits of RIS in ...

In 1948, the Shannon’s work titled ”A mathematical theory of communication” completely revolutionized the way to understand the problem of the reliable communications. He showed that any communications system is able to transmit with an arbitrarily low error probability as long as the transmission rate is kept below a certain limit. The separation between the source and channel coding was also shown as the optimal strategy to achieve the theoretical limits. Those ideas inspire the development of a whole digital communication theory focused on building more and more sophisticated coding schemes. It leads to most of communication systems were designed according to a digital approach and the separation principle from that moment, whereas other alternatives were set aside. However, in the last years, communication systems based on a jointly optimization of the source and channel encoder has aroused the interest ...

During the past two decades, image compression has developed from a mostly academic Rate-Distortion (R-D) field, into a highly commercial business. Various lossless and lossy image coding techniques have been developed. This thesis represents an interdisciplinary work between the field of astronomy and digital image processing and brings new aspects into both of the fields. In fact, image compression had its beginning in an American space program for efficient data storage. The goal of this research work is to recognize and develop new methods for space observatories and software tools to incorporate compression in space astronomy standards. While the astronomers benefit from new objective processing and analysis methods and improved efficiency and quality, for technicians a new field of application and research is opened. For validation of the processing results, the case of InfraRed (IR) astronomy has been specifically analyzed. ...

The level of automation in our society is ever increasing. Technologies like self-driving cars, virtual reality, and fully autonomous robots, which all were unimaginable a few decades ago, are realizable today, and will become standard consumer products in the future. These technologies depend upon autonomous localization and situation awareness where careful processing of sensory data is required. To increase efficiency, robustness and reliability, appropriate models for these data are needed. In this thesis, such models are analyzed within three different application areas, namely (1) magnetic localization, (2) extended target tracking, and (3) autonomous learning from raw pixel information. Magnetic localization is based on one or more magnetometers measuring the induced magnetic field from magnetic objects. In this thesis we present a model for determining the position and the orientation of small magnets with an accuracy of a few millimeters. This ...

The emergence of very capable mobile terminals, e.g. smartphones or tablets, has dramatically increased the demand of wireless data traffic in recent years. Current growth forecasts elucidate that wireless communication standards will not be able to afford future traffic demands, thus many research efforts have been oriented towards increasing the efficiency of wireless networks. Wireless communications introduce many issues not present in wired systems, e.g. multipath effects or interference. Some of these issues may be tackled by the use of multiple antennas, i.e. MIMO technologies. This solution allows increasing not only the reliability and robustness of the communications, i.e. the diversity gain, but also its efficiency, i.e. the multiplexing gain or degrees of freedom (DoF). The DoF describe the slope of channel capacity at very high signal-to-noise-ratio (SNR) regime. For a point-to-point (P2P) communication, assuming that the wireless channel response ...

In this thesis I describe the setup and design of a flexible rapid prototyping platform for RFID systems to provide an experimental verification environment for RFID systems, that allows their real-time exploration in distinct measurement setups. Furthermore, I use this system to test the feasibility of novel signal processing algorithms for RFID reader receivers, which promise a performance increase to state-of-the-art-receivers. Three different scenarios are considered: 1. In the first scenario, a single tag communicates with a single receive antenna reader. The performance of the optimal maximum likelihood sequence decoder is identified, and losses due to channel estimation and synchronisation are discussed. Due to the wide deviation from the nominal data rate in the uplink communication, especially synchronisation shows to be a critical issue. 2. In the second scenario, the single tag communicates with a multiple receive antenna RFID reader. ...