Ultra low-power biomedical signal processing: an analog wavelet filter approach for pacemakers (2006)
Generalized Noncoherent Ultra-Wideband Receivers
This thesis investigates noncoherent multi-channel ultra-wideband receivers. Noncoherent ultra-wideband receivers promise low power consumption and low processing complexity as they, in contrast to coherent receiver architectures, relinquish the need of complex carrier frequency and phase recovering. Unfortunately, their peak data rate is limited by the delay spread of the multipath radio channel. Noncoherent multi-channel receivers can break this rate limit due to their capability to demodulate multi-carrier signals. Such receivers use an analog front-end to separate the received signals into their sub-channels. In this work, the modeling and optimization of realistic front-end components is addressed and their impact on the system performance of noncoherent multi-channel ultra-wideband receivers is analyzed. With a proposed generalized mathematical framework, it is shown that there exists a variety of noncoherent multi-channel receiver types with similar system performance which differ only in their front-end filters. It ...
Pedroß-Engel, Andreas — Graz University of Technology
Ultra Wideband Communications: from Analog to Digital
The aim of this thesis is to investigate key issues encountered in the design of transmission schemes and receiving techniques for Ultra Wideband (UWB) communication systems. Based on different data rate applications, this work is divided into two parts, where energy efficient and robust physical layer solutions are proposed, respectively. Due to a huge bandwidth of UWB signals, a considerable amount of multipath arrivals with various path gains is resolvable at the receiver. For low data rate impulse radio UWB systems, suboptimal non-coherent detection is a simple way to effectively capture the multipath energy. Feasible techniques that increase the power efficiency and the interference robustness of non-coherent detection need to be investigated. For high data rate direct sequence UWB systems, a large number of multipath arrivals results in severe inter-/intra-symbol interference. Additionally, the system performance may also be deteriorated by ...
Song, Nuan — Ilmenau University of Technology
Electrocardiography (ECG) is the standard method for assessing the state of the cardiovascular system non-invasively. In the context of magnetic resonance imaging (MRI) the ECG signal is used for cardiac monitoring and triggering, i.e., the acquisition of images synchronized to the cardiac cycle. However, ECG acquisition is impeded by the static and dynamic magnetic fields which alter the measured voltages and may reduce signal-to-noise ratio (SNR), leading to false alarms during cardiac monitoring or to image artifacts during cardiac triggering. A major source of noise is the magnetohydrodynamic (MHD) effect as it is proportional to field strength and represents a key challenge in application of ultra-high-field (UHF) MRI >=7 T. In this work, two approaches for overcoming these limitations are proposed: i) Development of a hardware and software system based on the principal of photoplethysmography imaging (PPGi) as an optical ...
Spicher, Nicolai — University of Duisburg-Essen
Modulation Spectrum Analysis for Noisy Electrocardiogram Signal Processing and Applications
Advances in wearable electrocardiogram (ECG) monitoring devices have allowed for new cardiovascular applications to emerge beyond diagnostics, such as stress and fatigue detection, athletic performance assessment, sleep disorder characterization, mood recognition, activity surveillance, biometrics, and fitness tracking, to name a few. Such devices, however, are prone to artifacts, particularly due to movement, thus hampering heart rate and heart rate variability measurement and posing a serious threat to cardiac monitoring applications. To address these issues, this thesis proposes the use of a spectro-temporal signal representation called “modulation spectrum”, which is shown to accurately separate cardiac and noise components from the ECG signals, thus opening doors for noise-robust ECG signal processing tools and applications. First, an innovative ECG quality index based on the modulation spectral signal representation is proposed. The representation quantifies the rate-of-change of ECG spectral components, which are shown to ...
Tobon Vallejo, Diana Patricia — INRS-EMT
The present doctoral thesis aims towards the development of new long-term, multi-channel, audio-visual processing techniques for the analysis of bioacoustics phenomena. The effort is focused on the study of the physiology of the gastrointestinal system, aiming at the support of medical research for the discovery of gastrointestinal motility patterns and the diagnosis of functional disorders. The term "processing" in this case is quite broad, incorporating the procedures of signal processing, content description, manipulation and analysis, that are applied to all the recorded bioacoustics signals, the auxiliary audio-visual surveillance information (for the monitoring of experiments and the subjects' status), and the extracted audio-video sequences describing the abdominal sound-field alterations. The thesis outline is as follows. The main objective of the thesis, which is the technological support of medical research, is presented in the first chapter. A quick problem definition is initially ...
Dimoulas, Charalampos — Department of Electrical and Computer Engineering, Faculty of Engineering, Aristotle University of Thessaloniki, Thessaloniki, Greece
Quantization Strategies for Low-Power Communications
Power reduction in digital communication systems can be achieved in many ways. Re- duction of the wordlengths used to represent data and control variables in the digital circuits comprising a communication system is an efective strategy, as register power consumption increases with wordlength. Another strategy is the reduction of the required data trans- mission rate, and hence speed of the digital circuits, by efficient source encoding. In this dissertation, applications of both of these power reduction strategies are investigated. The LMS adaptive filter, for which a myriad of applications exists in digital communi- cation systems, is optimized for performance with a power consumption constraint. This optimization is achieved by an analysis of the effects of wordlength reduction on both perfor- mance -transient and steady-state- as well as power consumption. Analytical formulas for the residual steady-state mean square error (MSE) due ...
Gupta, Riten — University of Michigan
Signal processing for monitoring cerebral hemodynamics in neonates
Disturbances in cerebral hemodynamics are one of the principal causes of cerebral damage in premature infants. Specifically, changes in cerebral blood flow might cause ischemia or hemorrhage that can lead to motor and developmental disabilities. Under normal circumstances, there are several mechanisms that act jointly to preserve cerebral hemodynamics homeostasis. However, in case that one of these mechanisms is disrupted the brain is exposed to damage. Premature infants are susceptible to variations in cerebral circulation due to their fragility. Therefore, monitoring cerebral hemodynamics is of vital importance in order to prevent brain damage in this population and avoid subsequent sequelae. This thesis is oriented to the development of signal processing techniques that can be of help in monitoring cerebral hemodynamics in neonates. There are several problems that hinder the use in clinical practice of monitoring cerebral hemodynamics. On one hand, ...
Caicedo Dorado, Alexander — KU Leuven
Wireless Terabits per second (Tbps) link is needed for the new emerging data-hungry applications in Beyond 5G (B5G) (e.g., high capacity broadband, enhanced hotspot, 3D extended reality, etc.). The sub-GHz bands are scarce and overused, while the considered millimeter Wave bands in 5G are insufficient to reach the desired ultra-high throughput. Thus, the sub-THz/THz bands are envisaged as the next frontier for B5G wireless communication. Even though a wider bandwidth and large-scale MIMO are envisioned at sub-THz bands, but the system and waveform design should consider the channel characteristics, technological limitations, and high RF impairments. Based on these challenges, we proposed to use an energy-efficient low order single carrier modulation accompanied by spectral-efficient Index Modulation (IM) with advanced MIMO techniques In the first part of this thesis, the spectral-efficient MIMO Spatial Multiplexing (SMX) and Generalized Spatial Modulation (GSM), that generalizes ...
Majed SAAD — CantraleSupélec-France
Design and Realization of Fractional Systems for Signal Processing Applications
The concept of fractional calculus has emerged as one of the most effective mathematical tools for improving the performance of electrical circuits and systems. By using this tool electronic filters, oscillators, integrators, differentiators, and several other signal processing circuits and systems are realized in fractional sense. Consequently, these systems are known as fractional-order systems, and they enjoy more degree of freedom. Fractional-order systems also have higher accuracy and flexibility than the conventional systems. The fractional-order systems utilize fractance devices (FDs) in place of conventional passive circuit components. Although these FDs are not available commercially as a lumped element; they can be approximated using a semi-infinite R-C/R-L tree or ladder network. These R-C/R-L networks based FDs degrade the performance of the overall system in terms of power efficiency, noise, circuit complexity, and cost, etc. In this work, an attempt has been ...
Mishra, Shalabh Kumar — University of Delhi
Direction of Arrival Estimation and Localization Exploiting Sparse and One-Bit Sampling
Data acquisition is a necessary first step in digital signal processing applications such as radar, wireless communications and array processing. Traditionally, this process is performed by uniformly sampling signals at a frequency above the Nyquist rate and converting the resulting samples into digital numeric values through high-resolution amplitude quantization. While the traditional approach to data acquisition is straightforward and extremely well-proven, it may be either impractical or impossible in many modern applications due to the existing fundamental trade-off between sampling rate, amplitude quantization precision, implementation costs, and usage of physical resources, e.g. bandwidth and power consumption. Motivated by this fact, system designers have recently proposed exploiting sparse and few-bit quantized sampling instead of the traditional way of data acquisition in order to reduce implementation costs and usage of physical resources in such applications. However, before transition from the tradition data ...
Saeid Sedighi — University of Luxembourg
Design and Evaluation of Feedback Control Algorithms for Implantable Hearing Devices
Using a hearing device is one of the most successful approaches to partially restore the degraded functionality of an impaired auditory system. However, due to the complex structure of the human auditory system, hearing impairment can manifest itself in different ways and, therefore, its compensation can be achieved through different classes of hearing devices. Although the majority of hearing devices consists of conventional hearing aids (HAs), several other classes of hearing devices have been developed. For instance, bone-conduction devices (BCDs) and cochlear implants (CIs) have successfully been used for more than thirty years. More recently, other classes of implantable devices have been developed such as middle ear implants (MEIs), implantable BCDs, and direct acoustic cochlear implants (DACIs). Most of these different classes of hearing devices rely on a sound processor running different algorithms able to compensate for the hearing impairment. ...
Bernardi, Giuliano — KU Leuven
Distributed Signal Processing Algorithms for Multi-Task Wireless Acoustic Sensor Networks
Recent technological advances in analogue and digital electronics as well as in hardware miniaturization have taken wireless sensing devices to another level by introducing low-power communication protocols, improved digital signal processing capabilities and compact sensors. When these devices perform a certain pre-defined signal processing task such as the estimation or detection of phenomena of interest, a cooperative scheme through wireless connections can significantly enhance the overall performance, especially in adverse conditions. The resulting network consisting of such connected devices (or nodes) is referred to as a wireless sensor network (WSN). In acoustical applications (e.g., speech enhancement) a variant of WSNs, called wireless acoustic sensor networks (WASNs) can be employed in which the sensing unit at each node consists of a single microphone or a microphone array. The nodes of such a WASN can then cooperate to perform a multi-channel acoustic ...
Hassani, Amin — KU Leuven
Informed spatial filters for speech enhancement
In modern devices which provide hands-free speech capturing functionality, such as hands-free communication kits and voice-controlled devices, the received speech signal at the microphones is corrupted by background noise, interfering speech signals, and room reverberation. In many practical situations, the microphones are not necessarily located near the desired source, and hence, the ratio of the desired speech power to the power of the background noise, the interfering speech, and the reverberation at the microphones can be very low, often around or even below 0 dB. In such situations, the comfort of human-to-human communication, as well as the accuracy of automatic speech recognisers for voice-controlled applications can be signi cantly degraded. Therefore, e ffective speech enhancement algorithms are required to process the microphone signals before transmitting them to the far-end side for communication, or before feeding them into a speech recognition ...
Taseska, Maja — Friedrich-Alexander Universität Erlangen-Nürnberg
Sequential Bayesian Modeling of non-stationary signals
are involved until the development of Sequential Monte Carlo techniques which are also known as the particle filters. In particle filtering, the problem is expressed in terms of state-space equations where the linearity and Gaussianity requirements of the Kalman filtering are generalized. Therefore, we need information about the functional form of the state variations. In this thesis, we bring a general solution for the cases where these variations are unknown and the process distributions cannot be expressed by any closed form probability density function. Here, we propose a novel modeling scheme which is as unified as possible to cover all these problems. Therefore we study the performance analysis of our unifying particle filtering methodology on non-stationary Alpha Stable process modeling. It is well known that the probability density functions of these processes cannot be expressed in closed form, except for ...
Gencaga, Deniz — Bogazici University
Distributed Spatial Filtering in Wireless Sensor Networks
Wireless sensor networks (WSNs) paved the way for accessing data previously unavailable by deploying sensors in various locations in space, each collecting local measurements of a target source signal. By exploiting the information resulting from the multitude of signals measured at the different sensors of the network, various tasks can be achieved, such as denoising or dimensionality reduction which can in turn be used, e.g., for source localization or detecting seizures from electroencephalography measurements. Spatial filtering consists of linearly combining the signals measured at each sensor of the network such that the resulting filtered signal is optimal in some sense. This technique is widely used in biomedical signal processing, wireless communication, and acoustics, among other fields. In spatial filtering tasks, the aim is to exploit the correlation between the signals of all sensors in the network, therefore requiring access to ...
Musluoglu, Cem Ates — KU Leuven
The current layout is optimized for mobile phones. Page previews, thumbnails, and full abstracts will remain hidden until the browser window grows in width.
The current layout is optimized for tablet devices. Page previews and some thumbnails will remain hidden until the browser window grows in width.