This thesis considers the development of synchronization and signal processing techniques for digital communication receivers, which is greatly influenced by the digital revolution of electronic systems. Eventhough synchronization concepts are well studied and established in the literature, there is always a need for new algorithms depending on new system requirements and new trends in receiver architecture design. The new trend of using digital receivers where the sampling of the baseband signal is performed by a free running oscillator reduces the analog components by performing most of the functions digitally, which increases the flexibility, configurability, and integrability of the receiver. Also, this new design approach contributes greatly to the software radio (SWR) concept which is the natural progression of digital radio receivers towards multimode, multistandard terminals where the radio functionalities are defined by software. The first part of this research work ...

In direction finding (DF) applications, there are several factors affecting the estimation accuracy of the direction-of-arrivals (DOA) of unknown source locations. The major distortions in the estimation process are due to the array imperfections, model mismatches and multipath. The array imperfections usually exist in practical applications due to the nonidealities in the antenna array such as mutual coupling (MC) and gain/phase uncertainties. The model mismatches usually occur when the model of the received signal differs from the signal model used in the processing stage of the DF system. Another distortion is due to multipath signals. In the multipath scenario, the antenna array receives the transmitted signal from more than one path with different directions and the array covariance matrix is rank-deficient. In this thesis, three new methods are proposed for the problems in DF applications in the presence of array ...

This thesis addresses the problem of simplifying indoor ultrasonic location systems through the disposal of the radio synchronization subsystem. The location approach proposed herein is completely based on angle-of arrival (AOA) estimation of ultrasonic frequency-hopping spread spectrum (FHSS) signals transmitted by fixed beacons with known positions. The proposed system is privacy-oriented, that is the device to be located only receives and does not transmit signals. In the proposed location system, the beacons transmit their IDs using ultrasonic signals. The receiver acquires these IDs and determines its room-level position by table lookup. Following beacon identification, the receiver exploits a priori knowledge of the hopping patterns associated with the beacons and a sensor array to determine the AOA of the signal from each beacon. Next, the AOA information is used to determine the receiver's 3-D location using location algorithms proposed herein. In ...

Global Navigation Satellite Systems (GNSS) signals are broadly used for positioning, navigation and timing (PNT) in many different applications and use cases. Although different PNT technologies are available, GNSS is expected to be a key player in the derivation of positioning and timing for many future applications, including those in the context of the Internet of Things (IoT) or autonomous vehicles, since it has the important advantage of being open access and worldwide available. Indeed, GNSS is performing very well in mild propagation conditions, achieving position and time synchronization accuracies down to the cm and ns levels, respectively. Nevertheless, the exploitation of GNSS in harsh propagation conditions typical of urban and indoor scenarios is very challenging, resulting in position errors of up to tens or even hundreds of meters, and timing accuracies of hundreds of ns. This thesis deals with ...

This dissertation is dedicated to the exploration of various direct positioning algorithms for radio transmitters and passive target geolocation. Contrary to the traditional ``two-step'' approach, the ``direct positioning'' approach states that the radio transmitter's position can be extracted directly from the raw samples of the radio transmitter signals collected by the system sensors, without explicitly going through an estimation of position-related parameters such as time-delay, angular or amplitude information. In this work, the concept of direct positioning is applied to various models and consistently outperforms the traditional two-step position estimators, while tightly attaining the theoretical performance bounds. In the sequel, we explore 3 models for radio transmitters and passive target geolocation. The first model discussed in chapter 3, harnesses the transmit signal diversity of MIMO Radar systems to enhance passive-target position estimation via direct estimation algorithms. The algorithms are developed ...

This thesis deals with the problem of increasing the spectrum efficiency of cellular systems, by the use of antenna array base stations. The focus of the thesis is on downlink transmission in frequency division duplex systems, i.e., systems with different up and downlink carrier frequency. In a short summary the thesis: * Proposes five reasonable propagation models. * Uses these models to design and analyze three different beamformers: The maximum desired power (MDP), the summed interference to carrier ratio minimizing (SCIR) and the generalized-SCIR beamformer. * Introduces three capacity enhancement approaches: same sector frequency reuse (SSFR), reduced cluster size without nulling (RCS-WON) and reduced cluster size with nulling (RCS-WIN). * Proposes channel allocation, power control, and beamforming algorithms for these approaches. * Estimates the ``outage probability'' (probability of insufficient quality), for SICR-SSFR, SICR-RCS-WON and SICR-RCS-WIN, using simulations as well as ...

This Dissertation addresses the synchronization problem using an array of antennas in the general framework of Global Navigation Satellite Systems (GNSS) receivers. Positioning systems are based on time delay and frequency-shift estimation of the incoming signals in the receiver side, in order to compute the user's location. Sources of accuracy degradation in satellite-based navigation systems are well-known, and their mitigation has deserved the attention of a number of researchers in latter times. While atmospheric-dependant sources (delays that depend on the ionosphere and troposphere conditions) can be greatly mitigated by differential systems external to the receiver's operation, the multipath effect is location-dependant and remains as the most important cause of accuracy degradation in time delay estimation, and consequently in position estimation, becoming a signal processing challenge. Traditional approaches to time delay estimation are often embodied in a communication systems framework. Indeed, ...

The ability to reliably and cheaply localize mobile terminals will allow users to understand and utilize the what, where and when of the surrounding physical world. Therefore, mobile terminal location information will open novel application opportunities in many areas. The mobile terminal positioning problem is categorized into three different types according to the availability of (1) initial accurate location information and (2) motion measurement data. Location estimation refers to the mobile positioning problem when both the initial location and motion measurement data are not available. If both are available, the positioning problem is referred to as position tracking. When only motion measurements are available the problem is known as global localization. These positioning problems were solved within the Bayesian filtering framework in order to work under a common theoretical context. Filter derivation and implementation algorithms are provided with emphasis on ...

Mobile communication networks of the third and future generations are designed to offer high-data rate services like video-telephony and data-transfer. The current Rake receiver architecture will create a shortage in available bandwidth offered to the users. This is not due to a shortage in spectrum but results from inefficient receiver architectures. Spectral efficiency can be increased considerably through multi-user detection techniques in the receiver algorithms. The present thesis investigates iterative re- ceivers for encoded CDMA transmission in the uplink. The iterative receiver is a suboptimal receiver algorithm with manageable complexity. It consists of an inter- ference mitigating multi-user detector, a bank of single-user decoders, and a channel estimator. Instead of deciding on the transmitted symbols right after the first decod- ing, the receiver feeds back tentative decision symbols to mitigate multiple-access interference in the next iteration. Similarly, soft decision symbols ...

The use of multiple antennas at base stations and user devices is a key component in the design of cellular communication systems that can meet the capacity demands of tomorrow. The downlink transmission from base stations to users is particularly limiting, both from a theoretical and a practical perspective, since user devices should be simple and power-efficient, and because many applications primarily create downlink traffic (e.g., video streaming). The potential gain of employing multiple antennas for downlink transmission is well recognized: the total data throughput increases linearly with the number of transmit antennas if the spatial dimension is exploited for simultaneous transmission to multiple users. In the design of practical cellular systems, the actual benefit of multiuser multiantenna transmission is limited by a variety of factors, including acquisition and accuracy of channel information, transmit power, channel conditions, cell density, user ...

This thesis reports on an investigation of various system architectures and receiver structures for cellular communications systems which discriminate users by direct sequence code division multiple access (DSCDMA). Attention is focussed on the downlink of such a spread spectrum system and the influence of a number of design parameters is considered. The objective of the thesis is to investigate signal processing techniques which may be employed either at the receiver, or throughout the system to improve the overall capacity. The principles of spread spectrum communication are first outlined, including a discussion of the relative merits of spreading sequence sets, and a description of various signal processing techniques which are to be applied to the multi-user environment. The measure of system performance is introduced, and the conventional DS-CDMA system is analysed theoretically and through simulation to provide a reference performance level. ...

Device-to-Device (D2D) is one of the important proposed solutions to increase the capacity, offload the traffic, and improve the energy effciency in next generation cellular networks. D2D communication is known as a direct communication between two users without using cellular infrastructure networks. Despite of large expected bene fits in terms of capacity in D2D, the coexistence of D2D and cellular networks in the same spectrum creates new challenges in interference management and network design. To limit the interference power control schemes on cellular networks and D2D networks are typically adopted. Even though power control is introduced to limit the interference level, it does not prevent cellular and D2D users from experiencing coverage limitation when sharing the same radio resources. Therefore, the design of such networks requires the availability of suitable methods able to properly model the eff ect of interference ...

Receiver synchronisation can be a major problem in a mobile radio environment where the communication channel is subject to rapid changes. Communication in spread spectrum systems is impossible unless the received spreading waveform and receiver-generated replica of the spreading waveform are initially synchronised in both phase and frequency. Phase and frequency synchronisation is usually accomplished by performing a two-dimensional search in the time/frequency ambiguity area. Generally, this process must be accomplished at very low SNRs, as quickly as possible, using the minimum amount of hardware. This thesis looks into techniques for improving spread spectrum receiver synchronisation in terms of the mean acquisition time. In particular, the thesis is focused on receiver structures that provide and/or use a priori information in order to minimise the mean acquisition time. The first part of this work is applicable to synchronisation scenarios involving LEO ...

In this thesis a modified implementation of the adaptive minimum mean squared error (MMSE) receiver for a time division code division multiple access (TD-CDMA) system for third generation mobile communications is presented. This implementation can operate with spreading sequences which span over a few symbols and in environments where more than one spreading code is allocated to a single user. Two structures which combine the presented MMSE structure and the Rake receiver are also presented in an attempt to combine the advantages of both structures. After analysing the effect on a direct sequence spread spectrum system of multiple access interference and multipath fading induced inter-chip interference, the existing techniques for multiple access interference suppression capabilities are reviewed. Special attention is paid to the adaptive MMSE receiver, which takes into account the effect of multipath fading without requiring any additional channel ...

This thesis is concerned with the use of multiple antenna elements in wireless communication over frequency non-selective radio channels. Both measurement results and theoretical analysis are presented. New transmit strategies are derived and compared to existing transmit strategies, such as beamforming and space time block coding (STBC). It is found that the best transmission algorithm is largely dependent on the channel characteristics, such as the number of transmit and receive antennas and the existence of a line of sight component. Rayleigh fading multiple input multiple output (MIMO) channels are studied using an eigenvalue analysis and exact expressions for the bit error rates and outage capacities for beamforming and STBC is found. In general are MIMO fading channels correlated and there exists a mutual coupling between antenna elements. These findings are supported by indoor MIMO measurements. It is found that the ...